What circuit boards do we do? (30)
RF-60TC High Frequency PCB
Introduction
RF-60TC is a PTFE-based, ceramic-filled fiberglass substrate
specifically designed for high-power RF and microwave applications.
This material is engineered to operate at lower temperatures in
high-power settings while delivering improved gains and
efficiencies in miniaturized antenna applications within the 6.15
DK market. This advanced properties results from the enhanced
dielectric heat dissipation and exceptionally low dielectric
losses.
Features
Let's explore the exceptional features of RF-60TC:
Firstly, it boasts impressive thermal conductivity values: 0.9
W/m·K for unclad materials, 1.00 W/m·K for 0.5oz, and 1.05 W/m·K
for 1oz material. These values enhance design flexibility, extend
component lifespan, and ensure long-term reliability.
With a dielectric constant of 6.15 ± 0.15 at 10 GHz, RF-60TC aids
in device miniaturization, optimizing space efficiency.
At 10 GHz, the dissipation factor stands at 0.002 according to
IPC-650 2.5.5.5.1, ensuring efficient signal transmission.
RF-60TC exhibits a CTE value of X at 9.9, Y at 9.9, and Z at 40
ppm/°C. Its low CTE and enhanced dimensional stability enable the
construction of high layer count multilayer PCBs with improved
plated through hole reliability.
The material's moisture absorption rate is a minimal 0.03%, meeting
IPC-650 2.6.2.1 standards for environmental stability.
Lastly, RF-60TC complies with the UL 94 V-0 flammability rating,
ensuring high safety standards.
PCB Capability
| PCB Material: | PTFE based, ceramic filled fiberglass |
| Designation: | RF-60TC |
| Dielectric constant: | 6.15± 0.15 @10 GHz |
| Dissipation factor: | 0.002 @10 GHz |
| Layer count: | Single Layer, Double Layer, Multilayer, Hybrid PCB |
| Copper weight: | 1oz (35 µm), 2oz (70µm) |
| PCB thickness: | 5mil (0.127mm), 10mil (0.254mm); 20mil (0.508mm), 25mil(0.635mm);
30mil (0.762mm), 60mil (1.524mm) |
| PCB size: | ≤400mm X 500mm |
| Solder mask: | Green, Black, Blue, Yellow, Red etc. |
| Surface finish: | Bare copper, HASL, ENIG, Immersion silver, Immersion tin, ENEPIG,
OSP, Pure gold etc.. |
In this section, we'll showcase our extensive capabilities and the
wide options available to meet your PCB requirements:
Layer Count: Whether you're looking for a Single Layer, Double Layer,
Multilayer, or Hybrid PCB, we've got you covered with our
expertise.
Copper Weight: Choose from 1oz (35 µm) or 2oz (70µm) copper weight options to
meet your conductivity requirements.
PCB Thickness: Select from a range of thicknesses including 5mil (0.127mm), 10mil
(0.254mm), 20mil (0.508mm), 25mil (0.635mm), 30mil (0.762mm), and
60mil (1.524mm) for optimal design flexibility.
PCB Size: We can accommodate PCB sizes up to 400mm X 500mm.
Solder Mask: Customize your PCBs with a selection of colors like Green, Black,
Blue, Yellow, Red, and more.
Surface Finish: Choose from a variety of surface finishes including Bare copper,
HASL, ENIG, Immersion silver, Immersion tin, ENEPIG, OSP, Pure
gold, and more to ensure the perfect finish for your applications.
Applications
RF-60TC PCBs are widely utilized in high power amplifiers,
miniaturized antennas, GPS, Patch, and RFID reader systems,
filters, couplers, and dividers, as well as satellite communication
technologies.
Thank you for watching. I’ll see you next time.
