What circuit boards do we do? (27)
TMM13i High Frequency PCBs
Introduction
The Rogers TMM13i isotropic thermoset microwave material is a
ceramic thermoset polymer composite tailored for high reliability
in plated thru-hole strip-line and micro-strip applications. It
features an isotropic dielectric constant (Dk) and integrates the
advantageous properties of both ceramic and PTFE substrates, while
allowing for the convenience of soft substrate processing methods.
Features
TMM13i laminates have a low thermal coefficient of dielectric
constant of -70 ppm/°C, which ensures consistent dielectric
performance over a wide temperature range, making it ideal for
applications with expected temperature fluctuations.
The material’s isotropic coefficients of thermal expansion of 19,
19 and 20ppm/°C on X, Y and Z direction, very closely matched to
copper, allow for production of high reliability plated through
holes, and low etch shrinkage values.
Furthermore, TMM13i features a high dielectric constant of
12.85±0.35, allowing for the miniaturization of components and
facilitating the development of more compact electronic devices.
Its low dissipation factor of 0.0019 at 10 GHz further enhances
efficiency by minimizing energy loss, making it ideal for microwave
circuits.
PCB Capability
| PCB Material: | Ceramic, Hydrocarbon, Thermoset Polymer Composites |
| Designation: | TMM13i |
| Dielectric constant: | 12.85±0.35 |
| Layer count: | Single Layer,Double Layer, Multi-layer, Hybrid PCB |
| Copper weight: | 1oz (35µm), 2oz (70µm) |
| Dielectric thickness: | 15mil (0.381mm), 20mil (0.508mm), 25mil (0.635mm), 30mil(0.762mm),
50mil (1.27mm), 60mil (1.524mm), 75mil(1.905mm), 100mil (2.54mm),
125mil (3.175mm), 150mil (3.81mm), 200mil (5.08mm), 250mil
(6.35mm), 275mil (6.985mm), 300mil (7.62mm), 500mil (12.7mm) |
|
| PCB size: | ≤400mm X 500mm |
| Solder mask: | Green, Black, Blue, Yellow, Red etc. |
| Surface finish: | Bare copper, HASL, ENIG, OSP, Immersion tin, Immersion silver,
ENEPIG, Pure gold etc.. |
We are excited to present our PCB manufacturing capabilities using
TMM13i material.
Our facility accommodates a diverse range of configurations,
including single-layer, double-layer, multilayer, and hybrid PCBs,
ensuring we can meet the unique requirements of your projects.
Copper weight options of 1 oz (35 µm) and 2 oz (70 µm) are
available to cater to the specific electrical conductivity needs of
your applications.
Additionally, multiple dielectric thicknesses are allowed by our
manufacturing process, ranging from 15 mil (0.381 mm) to an
impressive 500 mil (12.7 mm).
We can accommodate large sizes up to 400 mm x 500 mm, making them
suitable for a wide range of applications.
To complement your design, we provide a selection of solder mask
colors, including green, black, blue, yellow, and red, allowing you
to align with your branding or functional needs.
For optimal performance and reliability, we offer an array of
surface finish options, including bare copper, HASL, ENIG, OSP,
immersion tin, immersion silver, ENEPIG, and pure gold.
Applications
TMM13i PCB is well-suited for various applications, such as chip
testers, dielectric polarizers, lenses, filters, couplers, RF and
microwave circuitry, and satellite communication systems etc.
Thank you for watching. I’ll see you next time.
